- Setting
the Time
QUICK SETTING INSTRUCTIONS: The CITIZEN Eco-Drive
perpetual calendar watch is preset at the factory,
but because it has crossed time zones and the international
date line, you will probably need to set it once to
be set for life. Just follow these simple instructions.
Pull the crown out to the first click. The second
hand will move to the month/leap year position that
has been previously set. Make sure that it is set
to the correct month/leap year as follows:
|
- Regarding
the Month
January: Between 1:00 and 2:00
February: Between 2:00 and 3:00
December: Between 12:00 and 1:00 Year
Passages Yea Passages
2000 Leap Year 2004 Leap Year
2001 1st Year 2005 1st Year
2002 2nd Year 2006 2nd Year
2003 3rd Year 2007 3rd Year
|
- To
set the time, pull the crown out to the second click
and adjust the second and minute hands. To advance
the hands forward turn the crown clockwise, to go
backwards turn the crown counterclockwise. Note: The
hour hand is linked with the minute hand and can be
set at this time or the hour hand can be set independently.
(See Changing the time difference)After setting is
completed, return the crown to the original position,
The watch will resume normal operation For setting
the hour hand independently see Changing the time
difference. After setting is completed, return the
crown to the original position, the watch will resume
normal operation
|
|
- How
to Read the Calendar memory
Pull the crown out one step; the second hand becomes
the Month/Leap Year indicator. The hour markers, 1-12
acts as Month Number Indicators. The first 3-minute
markers after each hour mark are used to indicate
the number of years after a Leap Year. EXAMPLE: If
the second hand moves to the 12 marker exactly, the
Month would be December of a leap year. If the second
hand moves to three 'ticks' after the 12, that would
indicate that the memory is set to December and the
Year is set to 3 Years after a Leap Year.
|
- Setting
the Calendar
Pull the crown out one step, the second hand will
move to a Month/Leap Year position and stop.
To change the Month/Leap Year indication, turn the
crown clockwise one 'click', the second hand moves
forward one 'tic' turn the crown counter clockwise
the second hand moves backwards. Set the second hand
to correct indication according to the Calendar Memory
guide shown to the left.
Changing the Date (Note the date can not be set independently)
Leaving the crown in, press in and release the A button
(that's the recessed push button at the 2:00 position
on the side of the case.) Now turn your crown clockwise
to advance the hour hand and date forward.
Turning the crown counter clockwise moves the hour
hand and the date backwards. Turning crown continuously
advances the hour hand rapidly. To stop rapid advancement
turn the crown in either direction. Since the Calendar
is perpetual, once it is set correctly, it changes
Month, Year setting and Date automatically until the
year 2100.
|
|
- Changing
the Time
With crown in (do not pull out).
Press in and release button (A) the recessed push
button at the 2:00 position on the side of the case
and turn the crown clockwise, the hour hand will move
forward by one hour. Turn the crown counterclockwise
and the hand will move backwards one hour. The second
hand continues moving while Time Zone is changed so
the accuracy of the time is not affected.
|
- All
Reset/Alignment
Pull out the crown to the second click. Press
button (A) for 1 second. (The second & hour hands
will perform a forward backward forward movement)
With the crown out 2 clicks align the second and minute
hands to the 12:00 position. With the crown 1 click
out align the date between the 31st and the 1st and
the hour hand at the 12:00 position Note: Turn the
crown clockwise advances the hands forward, turning
the crown counter clockwise advances the hands backwards.
After all the hands and the date have been set, return
the crown to the normal position and proceed with
setting procedure.
|
|
