- All
Reset
Press and release M button to move mode indicator
hand to TME(time)
Pull M out
Hold A,B and C down simultaneously for 3 seconds,
then releases them. All digital segments will be highlighted.
Press and release B to reset all segments to zero
and display UTC
Hold A down to align the UTC hour and minute hand
to 24:00 Press and release B to display HR(hours)
Hold A down to align minute hand to zero
Press in M to finalize zero positioning. Watch will
beep confirming all reset and zero positioning.
|
- To
Set
Calendar
Using the M button, move the mode indicator hand to
CAL. Note city code. If needed, use A button to move
the city code eastward and C button to move westward
Pull M button out to setting position, month number
will flash. Correct month by using C button.
Press and release A button, date will flash. Correct
date by using C button.
Press and release A button, year will flash. Use C
button to correct year.
Press M button to finalize calendar setting. Year
will disappear and day will be shown in its place
|
|
- Setting
the Alarm
Press
and hold B button down for 3 seconds, hour and minute
hands will retract to the 12 o'clock position. This
will permit an unobstructed view of the digital displays
during setting procedures. (After digital time is
set, press B button to release hand indicator)
Press and release M Button to move mode indicator
hand to time (TME) then set city code to one representing
your time zone.
Press and release A button to change city code eastward
and C button to move westward.
When city code has been selected, pull M button out.
Hour, minute and second figures will all flash.
Press and release C button to select daylight or standard
time (summer indicates daylight) hour hand will move
accordingly.
Press and release A button, seconds will blink. Reset
seconds by using C button
Press and release A button, minutes will blink. Use
C button to advance minutes. For fast advance, hold
C button down.
Press and release A button, hours will blink. Use
C button to advance hours. Note a.m. or p.m.
Press and release A button, 12H or 24H will blink.
Use C button to select a.m. /p.m. time(12h) or military
time (24H)
Press M button in to finalize setting of digital time.
All other cities are adjusted automatically when one
city is set to correct time, including the UTC analog
display
Press B button to release hand retractor, hands will
move to previously set time.
After you have set digital time and released the retractor,
if you want analog (hands) time to indicate the time
in your zone (city code), press buttons A and C simultaneously.
The digital time (your time zone) will be switched
to the analog display and vice versa. City code and
digital time can now be changed to your time zone
by using A button (eastward) or B button (westward).
Both analog and digital time now match.
If you want a time zone different than the shown on
the digital display, to be shown by the analog (hands),
move the digital time to the desired zone and repeat
the switching function.
|
|
- To
Set Alarms
Use the M button to move the mode indicator to
AL-1. Use A or C button to select city code.
Pull mode button out to setting position, display
blinks. Use C button to set alarm on or off.
Press and release A button, hours will blink. Correct
hours with C button.
Press and release A button, minutes will blink. Correct
minutes with C button.
Press M button to finalize alarm setting
Alarm 2 and 3 are set in the say way as alarm 1. When
alarms sound, press any button to stop sounding.
|
- Using
the Chronograph
Use
M button to move mode indicator to CHR.
Press and release A button to start or stop time measurement
While chronograph is running, press C button for split
time. Display now shows elapsed time for 10 seconds
while continuing to measure elapsed time internally.
After 10 seconds, display picks up counting at the
true elapsed time and continues running until C button
is pressed to stop.
After Chronograph is stopped. Press C button to reset
to zero.
|
- Using
the Timer
Use M button to move the mode indicator to TMR
Pull M button to setting position
Use C button to set timer in one minute increments
from maximum 60 minutes down to one minute as desired.
Press M button in to finalize setting
Pus A button to start or stop timer countdown.
Push C button while timer is running for flyback (to
timer set time) to restart automatically.
Push C button when timer is stopped to return timer
set time standby.
|
|
