- To
Set Digital Time
Press and release M Button to move mode indicator
hand to TME(Time)
Pull mode button out to setting position. The Watch
stops and the second figures in digital display II
start blinking. Press and release Button C to reset
seconds.
Press and release Button A, digital display I now
shows hours and digital display II shows minutes with
the minutes blinking. Press Button C to advance minutes.
For fast advance, hold C Button down.
Press and release Button A, hour figures in digital
display I will begin blinking. Press Button C to advance
hours (hours are displayed in the 24 hour system only).
Press button M in to finalize time setting. The second,
minute, hour and 24 hour hands will automatically
move to match the digital time.
|
- All
Reset and Zero Positioning
Press and release mode button to move mode indicator
to "SPL" chronograph split mode. Pull mode
button out to setting position and press and hold
Buttons A, B and C down for 3 seconds, then release
them. Digital displays I and II will be blank while
buttons are pressed but when buttons are released,
all digital segments in both displays will be highlighted
(black).
Press and release Button B to enter 'O' correction
mode, digital display I shows 'H'. Minute, hour and
24 hour hands (move in unison) can be moved clockwise
by pressing Button A and counterclockwise by pressing
Button C. Move hands until 24 hour hand is on 24 and
hour and minute hands are on 12. Press and release
Button B, digital display I will show 'S'.
Press A or C to move second hand to the 'O' position
(12 o'clock).
Press and release Button B, digital display I shows
'F'. Press Button A or C to move function hand to
'O' position. Press mode button in, to finalize all
reset procedure.
After all reset, digital time, calendar, alarm time,
local time and local time alarm must be reset.
|
|
- To
Set Calendar
Press and release the mode button to move mode
indicator hand to CAL. Digital display I shows month
and digital display II shows date.
Pull mode button out, month number starts blinking.
Press Button C to advance month. Press and release
Button A, date starts blinking. Press Button C to
advance date. Press and release Button A, digital
display I shows first two numbers and digital display
II shows last two numbers of the year and year numbers
will be flashing. Press Button C to advance year.
After mode button is pressed in, digital displays
show month number and date. (In time mode digital
displays show day of week and date).
|
- To
Set Alarm
Using mode button, move the mode indicator hand to
ALM ( or L.AL). Pull mode button out, the hours in
digital display I will blink. Press Button C to advance
hours.
Press and release Button A, minutes in digital display
II will blink. Press Button C to set minutes. Setting
alarm time sets alarm to on. Press mode button in
to finalize setting. To switch alarm off or on while
in alarm mode, press Button C. Hours in alarm mode
are displayed in 24 hour system only. While in alarm
mode, digital display II shows alarm off or on status.
|
|
- Using
the Chronograph
Use mode button to move to SPL mode. The split
time chronograph can measure up to 23 hour, 59 minutes,
59 and 99/100 seconds. It can also store 9 records
in memory
Press Button A to start or stop chronograph. Sweep
second hand measures chronograph seconds, function
hand measures minutes and digital display display
II shows 1/100 seconds. Digital display I shows split
time record number. If Button C is pressed while chronograph
is running, a split time is displayed for 10 seconds
and a record number appears in digital display I as
chronograph continues counting elapsed time internally.
If Button C is pressed when counting is stopped, chronograph
is reset to zero. Button B can then be pressed to
recall split memo's. Use mode button to move to chronograph
LAP mode. Chronograph in LAP mode can store up to
9 LAPS in its memory.
Press Button A to start or stop LAP chronograph. Sweep
second hand measures LAP seconds, function hand measures
LAP minutes and digital display II shows 1/100 second.
Digital display I shows L(LAP) and memo number. If
Button C is pressed while chronograph is running,
a LAP time is displayed for 10 seconds and a record
number appears in digital display I while chronograph
is measuring from the start of a new LAP time. If
LAP timing is stopped and Button C is pressed, chronograph
is reset to zero. To review LAP time memo's, press
Button B.
|
- Using
the Timer
Use mode button to move to timer mode. Timer can
be set to countdown from 60 minutes to 1 minutes in
1 minute increments. The function hand shows timer
set minutes, digital display I shows timer minutes
remaining and digital display II shows timer seconds
remaining during countdown.
Pull mode button out and press Button C to set timer
minutes(function hand). Press mode button in to finalize
setting. Press Button A to start or stop timer countdown.
Pressing Button C after timer is stopped resets timer
to original timer set time.
|
|
