- To
Set Digital Time and Calendar
Press and release button C until mode indicator pointers
to TME
Press and hold button B for three seconds, seconds
will flash. Press and release button A to reset seconds.
Press button B, minutes will flash. Press button A
to set minutes
Press button B, hours will flash. Use button A to
set hours
Press button B, 12H for AM/PM time or 24H for military
time.
Press Button C to finalize setting
Press Button C to move mode indicator to Cal Mode.
Press and hold button B for three seconds, month number
will flash. Use button A to adjust month
Press button B, date will flash. Use button A to adjust
date.
Press button B, year will flash. Use button A to adjust
year.
Press button C to finalize setting. Day of week is
set automatically.
|
- To
Set Alarm
Press button C to move the mode indicator to ALM.
Press and hold button B for three seconds, alarm hour
will flash.
Use button A to set alarm hour, (pay attention to
AM/PM time)
Press button B, alarm minutes will flash. Use button
A to set alarm minutes. Press button C to finalize
alarm setting
Press button A to switch alarm on or off. When alarm
sounds, it will sound for 20 seconds. Press any button
to stop alarm sound.
|
|
- To
Use the Chronograph
Press and release button C to move to the CHR,(chronograph)
mode.
Press button A to start or stop chronograph measurement.
When chronograph is stopped, press button B to reset
to zero.
Split time can be displayed for ten seconds by pressing
button B while chronograph is activated.
Press button A to stop and B to reset.
|
- To
Use race Chronograph
Press and release button C to move to RACE mode.
The race mode measures and records lap times up to
99 laps.
As additional laps are recorded, the fastest lap is
indicated by "BEST" in the 1/1000 second
window.
Press and release button A to start or stop and button
B when stopped to return to zero.
To measure a series of laps, press button A to start.
While time is running, press button B when firs lap
is completed. That will be lap #1.
First lap time will be displayed for 10 seconds as
internally watch begins measuring lap #2.
After 10 seconds, display resumes running and shows
lap #2 time.
Each time button B is pressed at the end overlap lap,
the lap number increases by one.
When the last lap is measured, press button A to stop
lap measurement and button B to reset.
After race chronograph has been reset, you may retrieve
the best lap time by pressing button b. If button
be is pressed again, the total time data will be displayed.
Press button B again to reset to zero.
|
|
- To
Use the 60 minute Countdown Timer
Press and release button C to move to the TMR
(timer) mode.
Timer time can be set by pressing button B. Each time
it is pressed, timer set time will be reduced by one
minute. Maximum timer time is 60 minutes while minimum
is 1 minute.
Press button A to start or stop timer countdown. When
stopped, press button B to reset to the previously
set timer time.
Timer restart function (fly back) can be activated
while timer is running by pressing button B.
|
- All
Reset
Pull the crown out and press buttons A,B and C
simultaneously and then release them. All of the digital
display segments will appear. Press the crown back
in to complete the "all reset".
After performing the "all reset", the digital
and analog times, as well as the calendar and alarms
will need to be set correctly.
|
|
