- Setting
the Time
Turn crown clockwise or counterclockwise to move the
hand to the time (TME) position.
Press and release button B to change city code eastward
and button A to move westward
When city code has been selected, pull crown out two
steps, summertime (SMT) blinks. Press and release
button A to select daylight or standard time (ON indicates
daylight, OF indicates standard) hour hand will move
accordingly
Press and release button B, seconds will blink. Reset
seconds by using button A.
Press and release button B, minutes will blink. Turn
the crown clockwise to advance minutes, turn the crown
counterclockwise to move the minutes backward. For
fast advance, turn the crown clockwise quickly 2 or
3 'clicks' and minutes will change rapidly until the
crown is turned 1 'click' in either direction to stop
the advance
Press and release button B, hours will blink. Rotate
crown to change hours. Set to correct a.m. or p.m.
Press and release button B, hours will blink. Use
button A to select a.m./p.m. (12H) or military time
(24H)
Push crown in to finalize setting of digital time.
All other cities are adjusted automatically when one
city is set to correct time, including the UTC analog
display.
After you have set the digital time, if you want the
analog (hands) time to also indicate the time in your
zone (city code), press buttons A and B simultaneously.
The digital time (your time zone) will be switched
to the analog display and vice versa. City code and
digital time and now be changed to your time zone
by using button B (eastward) or button A (westward).
both analog and digital time now match.
If you want a time zone different than that shown
on the digital display, to be shown by the analog
(hands, move the digital time to the desired zone
and repeat the switching function
|
|
- Setting
the Calendar
Turn crown clockwise or counterclockwise to move
the hand to the calendar (CAL) position
Press and release button B to change city code eastward
and button A to move westward
When city code has been selected, pull crown out two
steps, month number will flash. Turn the crown clockwise
to advance month number, turn the crown counterclockwise
to move the month number backward. For fast advance,
turn the crown clockwise quickly 2 or 3 'clicks' and
month number will change rapidly until the crown is
turned 1 'click' in either direction to stop its advance.
Press and release button B, date will blink. Use the
crown in the same manner as above to correct the date.
Press and release button B, Year will blink. Use the
crown in the same manner to set the year.
Push crown in to finalize calendar setting, year will
disappear and day will be shown instead.
|
- Using
the Chronograph
Turn crown clockwise or counter clockwise to move
the hand to chronograph (CHR) position.
Press and release button B to start or stop time measurement.
While chronograph is running, press button A for split
time. Display now shows elapsed time for 10 seconds
while continuing to measure elapsed time internally.
After 10 seconds, display picks up counting at the
true elapsed time and continues running until button
A is pressed for split time again, or button B is
pressed to stop.
After Chronograph is stopped, press button A to reset
to 0
|
- To
Set Alarms
Turn crown clockwise or counterclockwise to move the
mode hand to alarm 1 (AL-1) position
Press and release button B to change city code eastward
and button A to move westward.
When city code has been selected, pull crown out two
steps, alarm setting display blinks. Use button A
to set alarm on or off. Press and release button B,
hours will blink, turn the crown clockwise to advance
the hours, turn the crown counterclockwise to move
the hours backward. For fast advance, turn the crown
clockwise quickly 2 or 3 'clicks' and hours will change
rapidly until the crown is turned 1 'click' in either
direction to stop its advance. Press and release button
B, minutes will blink. Correct the minutes by using
the crown in the same manner. Push crown in to finalize
alarm setting. Alarm 2 and 3 are set in the same way
as alarm !. When either alarm sounds, press any button
to stop sounding. When buttons A and B are pushed
simultaneously, in alarm mode, the monitor sounds.
While in Alarm mode, it can also be set to on or off
by pulling crown out one step and pressing button
A.
|
|
- Using
60-Minute Timer
Turn crown clockwise or counterclockwise to move
the mode hand to timer (TMR) position. Pull the crown
out two steps and turn the crown clockwise to move
minutes backward. For fast advance, turn the crown
clockwise quickly 2 or 3 'clicks' and minutes will
change rapidly until the crown is turned 1 'click'
in either direction to stop its advance. Push crown
in to finalize timer setting.
Push button B to start or stop timer countdown.
Push button A while timer is running for fly back
(ti timer set time) and automatic restart.
Push button A when timer is stopped to return timer
to set time standby.
|
- Zero
Positioning Adjustment
If
the watch should display something improperly or a
malfunction is suspected, please perform the following
operation:
Turn crown clockwise or counter clockwise to move
the mode hand to chronograph (CHR) position.
Pull the crown out two steps to go to Zero Position
Correction Mode. All hands must indicate zero position
(12:00 for hour hand and 2400 hours for a.m./p.m.
hand. If not, turn crown clockwise to advance the
hour and 24 hour hands, and turn crown counterclockwise
to move them backward. Make sure 24 hour hand is set
to zero position as well.
Press and release button B to change the minute hand.
Turn crown clockwise to move minute hand backward.
Be sure UTC clock is set to 2400 hours. Press and
release B button to change the second hand. Turn crown
clockwise to move second hand to the zero position.
Push crown in, return to time mode and set time.
|
|
